Average Reviews:
(More customer reviews)My Meade classic LX200 power supply was ruined in a recent storm (roof blew off the whole observatory, but everything was salvageable except the hard-to-replace power supply). I needed an 18V DC power supply which could provide 2+ amps and had the right sized pin to fit my LX200. I searched high and low, far and wide. This particular model was the only one I came across which fit the bill. The only concern I had was polarity, which turned out to be a moot point - the supply tells you itself when the polarity is wrong! I attached the black-ended pin, plugged it into the wall and the LX200 control panel, turned on the LX200 and the blue light on the power supply started pulsing - and the ammeter on the LX200 didn't register any current. So I switched the pin around to reverse the polarity and tried again. Bingo! Perfect. Telescope now completely operational again with an outlay of less than $50. I highly recommend this power supply as a replacement for the Meade LX200 classic 18V DC supply.
Click Here to see more reviews about: VCT VM 80W18 - Universal AC to DC 18V Power Supply. Input 110V or 220V/240V AC - Output: 18V DC 4400mA
Input: 100 - 240V, AC 1.6 AMP, 47Hz to 63Hz Output: 18V, DC Maximum load: Can be used for 0mA to 4400mA or 4.4 Amp. With Changeable Polarity 6 Detachable Plugs as shownPin Size: 2.35x0.75mm, 3.5 x 1.35mm, 5.0x1.5mm, 4.0x0.17mm, 5.5x2.1mm, 5.5x2.5mmDRY LOCATION USE ONLY UL LISTED Weight: 1.5 LBS Dimensions(LxBxH): 4.5" Lx 2.4"W x 1.2"H
0 comments:
Post a Comment